Welcome To MEP Solution BD

Mechanical Service

Electrical service

Plumbing Service

Nylon Mesh Pre Filter-G4

Nylon Mesh Pre Filter-G4

Technical Specification
Filter Type Panel  Filter
Filter Class G2
Filter Media & Seperator Nylon Mesh
Frame Material Aluminium / Galvanised
Final Resistance 250Pa (Suggestion)
Temperature Resistance 80°C
Humidity Resistance (Relative Humidity) 80%RH
Category:

Description

Construction

Nylon mesh air filters are usually made of nylon fibers and have a microporous structure that effectively traps particles in the air. The filter material can be black or white nylon net, braided by polyamide monofilament, with wear resistance, acid and alkali resistance, corrosion resistance and other characteristics, long service life. In addition, the outer frame of the filter is generally made of aluminum alloy, galvanized iron frame, or stainless steel, and the design is lightweight and easy to clean and replace

Features

▸Large airflow;
▸Low pressure drop;
▸Strong structure;
▸Washable;
▸Long Service life.

Application

It is suitable for central air conditioning systems, household air conditioning, air purification equipment, and special environments (such as acid and alkali resistance, high temperature places), and ventilation filtration. In addition, it is also widely used in Marine, offshore engineering, and clean workshop scenarios
Technical Specification
Filter Type Panel  Filter
Filter Class G2
Filter Media & Seperator Nylon Mesh
Frame Material Aluminium / Galvanised
Final Resistance 250Pa (Suggestion)
Temperature Resistance 80°C
Humidity Resistance (Relative Humidity) 80%RH
Curve of Air Flow and Resistance
Dimensions & Technical Details
Depth
(mm)
 Size
(mm)
Rated Airflow
(m³/h)
Rated Air Velocity
(m/s)
Initial Resistance(Pa)
G2
10 / 21 595×595 5400 4.0 <2
495×595 5000 4.0
495×495 4500 4.0
295×595 3000 4.0
Note: other specifications can be customized according to requirements

How to Clean Nylon Mesh Air Filter?

Remove filter
First, remove the nylon mesh filter from the equipment according to the equipment manual or operating guide. During the removal process, take care to avoid scratching the filter surface or other parts of the device.
Preliminary cleaning
Use a vacuum cleaner or soft brush to gently remove dust and impurities from the surface of the filter. If there is much dust, rinse with clean water or rinse with warm water (temperature does not exceed 50 °C).
Deep cleaning
If there are stubborn stains or grease on the filter, it can be cleaned with a neutral detergent. Soak the filter in water containing detergent for about 1.5 hours, then rinse it off with clean water.
Drying treatment
After cleaning, place the filter in a cool and ventilated place to dry, avoid direct sunlight or high temperature drying, so as not to damage the nylon material. If time is tight, low temperature drying can also be used, but the temperature needs to be controlled.
Inspection and maintenance
Before reinstalling the filter, check it for damage or deformation. If the filter cannot be used properly, replace it with a new one.
Periodic replacement
Although nylon mesh filters have better durability and washability, in order to ensure air quality, it is recommended to replace the filter regularly. The replacement interval can be determined based on the device environment and the manufacturer’s suggestions

Reviews

There are no reviews yet.

Be the first to review “Nylon Mesh Pre Filter-G4”

Your email address will not be published. Required fields are marked *